CCIE DC V2 Success: Mr. Ankit Verma CCIE Data Center #57200, Mr. Keval Smart CCIE Data Center #56915, Mr. Vijay Pandey CCIE Data Center #56720, Mr. Victor Ade Adeboje CCIE Data Center, #56196 Mr. Binoy CCIE Data Center #56657, Mr. Muruguppan CCIE Data Center #56434, Mr. Pritish Patil CCIE Data Center #56048
CCIE Results
  • info@networkershome.com
  • Bangalore +91-8447971084

    Gurugram +91-9999158475

  • Delhi +91-9611027980

    or +91-8447971084

  • USA +1-408-753-0671

HOME > PROGRAMS > CCNP Routing and Switching
Duration: 120 Hours

CCNP Routing and Switching

  • Course Summary
  • Course Content
  • Career Path ways

Outline:

Anyone with at least one year of CCNP Routing and Switching and is ready to advance his skills and work independently on complex network scenarios and come up with solutions should go for CCNP Routing and Switching certification. Getting certified demonstrates the skills required in production as a systems engineer, support engineer, network engineer or a network technician.

CCNP Routing and Switching certification proves your ability to design, implement, verify and troubleshoot local as well as wide area enterprise networks. Also, it validates that you can work with specialists on advanced security, wireless, voice, and video solutions. The routing and switching skills you’ll gain while doing this certification provide a solid foundation.

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates that you have the ability to plan, implement, verify and troubleshoot local and wide area enterprise networks and that you can work collaboratively with specialists on advanced security, voice, wireless and video solutions.

The CCNP Routing and Switching certification is right for you if you have at least one year of networking experience and you are ready to advance your skills and work independently on complex network solutions. Achieving CCNP Routing and Switching demonstrates the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.

The routing and switching protocol knowledge and skills you’ll gain while pursuing this certification provide a lasting foundation. They are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

Cisco Certified Network Professional or CCNP training Routing and Switching authenticates the capability to implement, plan, confirm and provide support for wide and local area enterprise networks and work collaboratively with experts on advanced security, wireless, voice, and video solutions. After completing any of the CCNP courses, students will be able to work as: network engineers, support engineers, systems engineers or network technicians.

The exams which you need to take in order to be CCNP certified are as below:

a) Implementing Cisco IP Routing (300-101 ROUTE)
b) Implementing Cisco IP Switched Networks (300-115 SWITCH)
c) Troubleshooting and Maintaining Cisco IP Networks (300-135 TSHOOT)

What I will learn?
  • Basic Network and Routing Concepts
  • Internet connectivity in an Enterprise
  • Hardening of various Routers and routing protocols
  • Redistribution of Routes
  • Implementation of path control
  • Implementation of Open Shortest Path First (OSPF)
  • Implementation of Enhanced Interior Gateway Routing Protocol (EIGRP)
  • The operation of Layer 2 and Layer 3 / multilayer switches
  • Switching Database Manager
  • Link Layer Discovery Protocol (LLDP) and Power over Ethernet (PoE) implementation
  • Virtual LANs (VLANs) and trunks and working of VLAN Trunking Protocol (VTP)
  • Dynamic Host Configuration Protocol (DHCP) server and relay agent configurations for both IPv4 and IPv6
  • Port aggregation for Layer 2 and Layer 3
  • All types of Spanning tree protocols and their mechanisms – Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree (MST)
  • Inter-VLAN routing implementation using both a router as well as a multilayer switch
  • High availability of networks including Network Time Protocol (NTP), Simple Network Management Protocol version 3 (SNMPv3), port mirroring, switch virtualization and Internet Protocol Service Level Agreement (IP SLA).
  • First hop redundancy protocols for IPv4 and IPv6 – Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Gateway Load Balancing Protocol (GLBP)
  • Implementation of network security features – port security, DHCP snooping, dynamic Address Resolution Protocol (ARP) inspection, IP source guard, storm control, VLAN ACLs (VACLs), and private VLANs
  • Understanding the use of an external authentication server in your network, including implementation of IEEE 802.1x
  • Common maintenance functions performed in complex enterprise networks
  • Troubleshoot and maintain complex enterprise networks
  • Maintenance procedures and resolution of faults in routed environments, switched environments, as well as in a infrastructure which is secure.

 

Labs on Real Cisco Device.

(SWITCHING LABS)

Basic Switching Review Lab

  1. 1. Preliminary Switch Configuration
  2. 2. VLANs and VTP
  3. 3. VLAN Trunks
  4. 4. EtherChannel
  5. 5. Switchport and Switch IP Configuration

Multilayer Switching, DHCP, and SDM

  1. 1. Switched Virtual Interface Configuration
  2. 2. Configuring the Switch as a DHCP Server
  3. 3. CEF and TCAMs
  4. 4. Switching Database Manager (SDM)

PVST 802.1d Spanning-Tree

  1. 1. 802.1d Root Bridge Selection
  2. 2. PVST Path Manipulation (Part 1)
  3. 3. PVST Path Manipulation (Part 2)
  4. 4. Portfast, UplinkFast, & BackboneFast
  5. 5. STP Topology Changes
  6. 6. BPDUGuard & Err-Disable Recovery
  7. 7. BPDUFilter, LoopGuard, & RootGuard

802.1w RSTP and 802.1s MST

  1. 1. Comparing RSTP & 802.1d Convergence
  2. 2. 802.1s MST Initial Configuration
  3. 3. 802.1s MST Load Balancing

VLAN Access-Lists

  1. 1. Initial VACL Configuration
  2. 2. Using ACL “Deny” statements within a VACL
  3. 3. Troubleshooting an existing VACL

Private-VLANs

  1. 1. Community Private VLANs
    2. Isolated Private LANs
  2. 3. PVLAN Promiscuous Ports (SVIs)
  3. 4. PVLAN Promiscuous Ports (L2 Interfaces)

Switching Security Features

  1. 1. The Need for DHCP Snooping
  2. 2. DHCP Snooping Configuration
  3. 3. Demonstrating the Need for Dynamic ARP Inspection
  4. 4. Dynamic ARP Inspection Configuration
  5. 5. IP Source Guard
  6. 6. Storm-Control

First Hop Redundancy Protocols

  1. 1. HSRP Configuration
  2. 2. Configuring Sub-Second HSRP Timers
  3. 3. HSRP Object Tracking
  4. 4. VRRP
  5. 5. GLBP Basic Configuration

(ROUTING LABS)

EIGRP

  1. 1. EIGRP Initial Configuration
  2. 2. EIGRP Neighborships
  3. 3. EIGRP Metric Manipulation: BW and Delay
  4. 4. EIGRP Metric Manipulation: Offset-Lists
  5. 5. EIGRP Stuck-In-Active
  6. 6. EIGRP Route Filtering with Distribute-Lists (Standard ACLs)
  7. 7. EIGRP Route Filtering with Distribute-Lists (Extended ACLs)
  8. 8. EIGRP Route Filtering with Distribute-Lists (Prefix-Lists)
  9. 9. EIGRP Route Filtering with Distribute-Lists (Route-Maps)
  10. 10. EIGRP Route Summarization (Auto-Summary)
  11. 11. EIGRP Route Summarization (Manual Summarization)
  12. 12. Limiting Query Propagation (EIGRP Stub)
  13. 13. Limiting Query Propagation (Summarization)
  14. 14. EIGRP Default Route Propagation (Redistribute Static)
  15. 15. EIGRP Default Route Propagation (Manual Summarization)
  16. 16. EIGRP: Named Mode Configuration
  17. 17. EIGRP: Full Scale CCNP Lab

OSPF

  1. 1. OSPF Initial Configuration
  2. 2. OSPF Virtual-Links
  3. 3. OSPF Designated Routers
  4. 4. OSPF Network Type Mismatches
  5. 5. OSPF Stub Areas
  6. 6. OSPF Advanced Configuration

IGP Redistribution

  1. 1. IGP Redistribution – EIGRP & RIPv2
  2. 2. IGP Redistribution – EIGRP & OSPF
  3. 3. IGP Redistribution – Advanced Lab1
  4. 4. IGP Redistribution – Advanced Lab2

BGP

  1. 1. eBGP Neighborship
  2. 2. BGP Update Source & Multihop
  3. 3. BGP Message Types
  4. 4. BGP Path Attributes
  5. 5. BGP for Outbound Routing
  6. 6. iBGP
  7. 7. BGP Peer-Groups
  8. 8. BGP Filtering
  9. 9. BGP Address-Family Configuration
  10. 10. MP-BGP

VPN Technologies

  1. 1. VPN – Site to Site
  2. 2. VPN –DMVPN (Phase 1, 2 & 3)
Jobs:

Below are a few job roles for which CCNP certified candidates can apply and opt for:

  • Network Administrators
  • Network Support Specialist
  • Network Integrators
  • Cisco Network Engineer
  • Cisco Network Consultants

 

Future Training & Learning:

To advance their career and continue with their learning candidates can go for the following certification programs in different tracks:

Apply for this Course

Enquire Now
FREE WEEKLY UPDATES
Get the latest content first.
We respect your privacy.

Stay updated with upcoming training opportunities.

Latest Results and updated information on new Course Launch.Be the first one to know.